The short version: you agree to these terms when you buy a licence, or install or use the software. You use ONAC Network Studio at your own risk - see sections 4 and 9. This is the same agreement shown in the installer.

This agreement is between you (the "Customer", "you") and ONAC Technologies ("ONAC", "we"). It covers both editions of ONAC Network Studio: ONAC Network Studio and ONAC Network Studio Pro (together, the "Software").

The Software is protected by copyright and is licensed, not sold. All rights not expressly granted in this agreement are reserved. By buying a licence, or by installing or using the Software, you agree to this agreement. If you do not agree, do not buy, install or use the Software.

1. Licence

1.1 When you buy a licence we grant you a non-exclusive, non-transferable licence to install and use the edition of the Software you bought on the number of computers allowed by your licence key (the "activation limit"), for as long as your licence remains valid.

1.2 A subscription licence is valid while the subscription is paid; when it ends, the Software stops working until it is renewed. A one-off ("lifetime") licence, where offered, remains valid indefinitely for the version family bought.

1.3 The Software checks your licence online when activated and periodically afterwards. It can run offline for up to 14 days since the last successful check.

2. Restrictions

You must not:

  1. share, sell, rent, lend or otherwise give your licence key or an activated copy of the Software to anyone else;
  2. circumvent, disable or interfere with the licence activation or checking;
  3. reverse engineer, decompile or disassemble the Software, except to the extent the law allows you to despite this restriction, and except as permitted for the third-party libraries described in section 8;
  4. use the Software in breach of any law, or of the terms of any vehicle manufacturer or third-party system you connect it to.

3. Moving your licence

You may move your licence to another computer by using "Deactivate this PC" in the Software (Licence button) and then activating on the new computer.

4. Vehicle safety — important

4.1 The Guided Test asks you to carry out actions on a vehicle, such as pressing pedals or operating switches. Only carry out a step when it is safe to do so. In ONAC Network Studio, every step is carried out with the vehicle stationary.

4.2 ONAC Network Studio Pro can also transmit messages onto vehicle networks ("Send Messages") and includes a Guided Test step that involves driving the vehicle. Transmitting on a vehicle network can change how the vehicle behaves, including safety-related systems. Only use these features when it is safe, on a stationary vehicle, bench or closed test area unless a step clearly states otherwise, and never on public roads.

4.3 Signal names, scaling and other results produced by the Software, including by AI features, are estimates and may be wrong. Verify them before relying on them.

4.4 The Software is a diagnostic and development tool. It is not designed for, and must not be used in, safety-critical or life-support applications.

4.5 YOU USE THE SOFTWARE AT YOUR OWN RISK. Working on vehicles and their electrical systems carries a risk of injury to people and damage to vehicles, equipment and other property. You are responsible for deciding whether and how to use the Software, for the safety of the vehicle, yourself and anyone nearby, and for any action you take based on what the Software shows.

4.6 Only connect the Software to vehicles and equipment you own or are authorised to work on. Never operate the Software while driving: if a vehicle must move, a second person must operate the Software.

4.7 Electric and hybrid vehicles. Electric and hybrid vehicles contain high-voltage systems that can cause serious injury or death. The Software only reads data through the vehicle's low-voltage diagnostic and network connections, and its Guided Test steps only ask you to use the vehicle's normal controls (for example the charge port, plugging in a charger, drive modes or the heater). Never open, disconnect, probe or connect equipment to any high-voltage battery, cable (usually orange) or component. Work on high-voltage systems must only be done by suitably trained and qualified people. When charging, follow the vehicle and charger manufacturers' instructions.

4.8 Battery readings. State of charge, range, cell voltages, temperatures and any battery-health figures shown by the Software are estimates decoded from vehicle data. They are not a certified battery state-of-health report and must not be relied on to value, buy, sell or certify a vehicle or battery.

4.9 Security gateways. Some vehicles have a security gateway that blocks or limits access through the diagnostic port, so some data may not be available. You must not use the Software to get around such a gateway unless you are authorised to do so.

4.10 Personal data. Logs can include location, speed, driving behaviour and vehicle identifiers such as the VIN. If you record vehicles driven by other people (for example fleet or insurance customers), those logs may be personal data, and you are responsible for handling them lawfully, including under the UK GDPR.

5. ONAC Network Studio Pro

5.1 ONAC Network Studio Pro is supplied only to people we have approved. We approve applications at our discretion, based on the information you give us.

5.2 You confirm that the information you gave in your application is accurate, and you agree to keep to the declarations you made in it.

5.3 Your Pro licence is personal to you. You must not let anyone else use Send Messages or the driving Guided Test step under your licence.

5.4 We may end your Pro licence if the information you gave was inaccurate or you do not keep to this section.

6. AI features

The AI features use an AI service account and API key that you provide (e.g. Anthropic or Google). Data you choose to analyse is sent to that service under your agreement with them; we do not receive it. You are responsible for that account, its costs and its terms.

7. Hardware and third-party drivers

7.1 PicoScope support uses Pico Technology software, which is licensed on Pico Technology's conditions, including: the Pico Technology software is for use only with Pico Technology products or with data collected using Pico Technology products; Pico Technology shall not be liable for any loss, damage or injury, howsoever caused, related to the use of Pico Technology equipment or software, unless excluded by statute; and it must not be used in mission-critical applications such as life support systems. By using PicoScope support you agree to those conditions.

7.2 Mongoose ISO3 support requires the device manufacturer's own J2534 driver, which you obtain and install from them under their terms.

8. Third-party software

8.1 The Software includes third-party open-source components, listed with their licences in the "licenses" folder installed with the Software (THIRD_PARTY_NOTICES.txt). Those components are licensed to you under their own licences, and nothing in this agreement limits your rights under them.

8.2 In particular, Qt for Python (PySide6/Qt) and asammdf are used under the GNU Lesser General Public License v3 (LGPL-3.0), copies of which (with the GNU GPL v3 it builds on) are in the "licenses" folder, and libusb (libusb-1.0.dll, used for CANable / candleLight adapters) is used under the GNU Lesser General Public License v2.1 or later (LGPL-2.1), a copy of which is also in that folder. You may replace those libraries in the installation folder with your own modified versions, and reverse engineer the Software to the extent necessary to debug such modifications. We will provide the source code of those libraries, as used, on request to contact@onactech.co.uk for at least three years from your purchase.

9. Warranty and liability

9.1 Nothing in this agreement affects your statutory rights as a consumer, including under the Consumer Rights Act 2015 where it applies.

9.2 Subject to 9.1, the Software is provided "as is" and we do not warrant that it is error-free or suitable for any particular purpose.

9.3 Subject to 9.1 and to liability that cannot be limited by law (such as for death or personal injury caused by negligence, or fraud), our total liability is limited to the amount you paid for the licence in the 12 months before the claim, and we are not liable for:

  1. damage to, or loss of, any vehicle, module, equipment or other property;
  2. injury to any person, except as set out above;
  3. loss of data, profit, revenue, business, goodwill or time;
  4. repair, recovery or replacement costs, or voided warranties;
  5. claims made against you by anyone else; or
  6. any indirect or consequential loss.

9.4 Subject to 9.1, you will indemnify ONAC against claims, losses and costs (including reasonable legal fees) arising from your use of the Software or your breach of this agreement, including claims by vehicle owners, employers, customers or other third parties, except to the extent they are caused by our own negligence or fraud.

9.5 In this section "ONAC" includes ONAC Technologies' owner, employees, agents and contractors, who may each rely on clauses 9.3 and 9.4 under the Contracts (Rights of Third Parties) Act 1999.

10. Termination

This licence ends automatically if you breach it, if your subscription ends, or if your payment is refunded or reversed. You must then stop using the Software.

11. Governing law

This agreement is governed by the law of England and Wales, and the courts of England and Wales have jurisdiction.

Contact: contact@onactech.co.uk | onactech.co.uk